HPCL-063A
(nachfolgend Auszug aus dem Datenblatt " HCMOS Compatible, High CMR, 10 MBd Optocouplers " von Agilent Technologies)


Minimum CMR Input
On-
Current
(mA)		 Output
Enable		 8-Pin DIP (300 Mil) Small-Outline SO-8
dV/dt
(V/µs) 		VCM
(V)		 Dual
Channel
Package		 Dual
Channel
Package
1000 50 3
3mA x 2,2kW = 6,6V		 nein HCPL-063A HCPL-063A


Schema des HPCL-063A
     


Absolute Maximal Leistung
Parameter Symbol Min. Max. Units Note
Operating Temperature TA - 40 + 85 °C  
Average Input Current IF(AVG)   10 mA 1
Reverse Input Voltage VR   3 Volts  


Empfohlener Operations-Status
Parameter Symbol Min. Max. Units Note
Input Voltage, Low Level VFL - 3 0.8 V
Input Current, High Level IFH 3.0 10 mA
Power Supply Voltage VCC 4.5 5.5 Volts
High Level Enable Voltage VEH 2.0 VCC Volts
Low Level Enable Voltage VEL 0 0.8 Volts
Fan Out (at RL = 1 kW) N   5 TTL Loads
Output Pull-up Resistor RL 330 4k W
Operating Temperature TA - 40 85 °C


Elektrische Spezifikationen
Empfohlene Operations-Temperatur (TA = - 40°C bis + 85°C) außer es ist anderweitig spezifiziert.
Parameter Symbol Min. Typ.* Max. Units Test Conditions Fig. Note
High Level Output Current IOH   3.1 100 µA VCC = 5.5 V, VO = 5.5 V,
VF = 0.8 V, VE = 2.0 V		 4 18
Low Level Output Voltage VOL   0.4 0.6 V VCC = 5.5 V, IOL = 13 mA
(sinking), IF = 3.0 mA,
VE = 2.0 V		 5, 8 4, 18
High Level Supply Current ICCH   7
 10
 mA VE = 0.5 V VCC = 5.5 V
IF = 0 mA 		  4
  9 15
Low Level Supply Current ICCL   8 13 mA VE = 0.5 V VCC = 5.5 V
IF = 3.0 mA		    
  12 21
High Level Enable Current** IEH   - 0.6 - 1.6 mA VCC = 5.5 V, VE = 2.0 V    
Low Level Enable Current** IEL   - 0.9 - 1.6 mA VCC = 5.5 V, VE = 0.5 V    
Input Forward Voltage VF 1.0 1.3 1.6 V IF = 4 mA 6 4
Temperature Coefficient
of Forward Voltage		 DVF /DTA   - 1.25   mV/ °C IF = 4 mA   4
Input Reverse
Breakdown Voltage		 BVR 3 5   V IR = 100 µA   4
Input Capacitance CIN   60   pF f = 1 MHz, VF = 0 V    
*Alle Werte bei TA = 25°C, VCC = 5 V


Wechselnde Spezifikationen
Empfohlene Operations-Temperatur (TA = - 40°C bis + 85°C) außer es ist anderweitig spezifiziert.
Parameter Symbol Min. Typ.* Max. Units Test Conditions Fig. Note
Input Current Threshold
High to Low		 ITHL   1.5 3.0 mA VCC = 5.5 V, VO = 0.6 V,
IO >13 mA (Sinking)		 7, 10 18
Propagation Delay Time
to High Level		 tPLH   52 100 ns IF = 3.5 mA
Output VCC = 5.0 V,
VE = Open,
CL =15 pF,
RL = 350W		 9, 11,
12		 4, 9,
18
Propagation Delay
Time to Low Output
Level		 tPHL   53 100 ns 9, 11,
12		 4, 10,
18
Pulse Width Distortion PWD
|tPHL - tPLH |		   11 45 ns 9, 13 17, 18
Propagation Delay Skew tPSK     60 ns 24 11, 18
Output Rise Time tR   42   ns 9, 14 4, 18
Output Fall Time tF   12   ns 9, 14 4, 18
Propagation Delay
Time of Enable
from VEH to VEL		 tEHL   19   ns IF = 3.5 mA
VCC = 5.0 V,
VEL = 0 V, VEH =3 V,
CL = 15 pF,
RL = 350W		 15, 16 12
Propagation Delay
Time of Enable
from VEL to VEH		 tELH   30   ns 15, 16 12
*Alle Werte bei TA = 25°C, VCC = 5 V.


Allgemeine Gleichspannungsunterdrückungs-Spezifikation,
Alle Werte bei TA = 25°C
Parameter Symbol Min. Typ. Units Test Conditions Fig. Note
Output High Level
Common Mode
Transient Immunity		 |CMH | 1 5 kV/µs VCM = 50 V, VCC = 5.0 V,
RL = 350 W,
IF = 0 mA,
TA = 25°C
VO(MIN) = 2 V		 17 4, 13,
15, 18
Output Low Level
Common Mode
Transient Immunity		 |CML | 1 5 kV/µs VCM = 50 V, VCC = 5.0 V,
RL = 350 W,
IF = 3.5 mA,
VO(MAX) = 0.8 V,
TA = 25°C		 17 4, 14,
15, 18